Receiving and Processing a SAML 2.0 Response With an HttpServlet Using OpenSAML

Due to the popularity of my prior posts on processing SAML using OpenSAML I put together this code that shows a more real-world-example of how you would setup an HttpServlet to sit and listen for SAML Responses that are posted to it.  Then it just shows what you might do with the Response to get what you need out of it.  Again, I'm just verifying the Signature on the Response, Decrypting the Assertion and then looping through the Attribute nodes to look at the name/value pairs.  There are other things that you might want to do such as receiving the signing-key from the Response itself (if it's being sent), or verifying a Signature on the Assertion if that's what's being signed.  The trouble I've found with SAML implementations is that the spec is consistent, but how people use it isn't, so you'll undoubtedly need to tweak something depending on what your requirements are, but this code should get you started.

import java.io.PrintWriter;
import java.io.IOException;
import java.io.File;
import java.io.FileInputStream;
import java.io.InputStream;

import java.util.List;

import java.security.KeyFactory;
import java.security.KeyStore;
import java.security.PublicKey;
import java.security.cert.CertificateFactory;
import java.security.cert.X509Certificate;
import java.security.interfaces.RSAPrivateKey;
import java.security.spec.X509EncodedKeySpec;

import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

import org.opensaml.common.binding.BasicSAMLMessageContext;
import org.opensaml.saml2.binding.decoding.HTTPPostDecoder;
import org.opensaml.ws.message.MessageContext;
import org.opensaml.ws.transport.http.HttpServletRequestAdapter;
import org.opensaml.saml2.core.Assertion;
import org.opensaml.saml2.core.Attribute;
import org.opensaml.saml2.core.AttributeStatement;
import org.opensaml.saml2.core.Response;
import org.opensaml.saml2.encryption.Decrypter;
import org.opensaml.xml.XMLObject;
import org.opensaml.xml.encryption.DecryptionException;
import org.opensaml.xml.encryption.InlineEncryptedKeyResolver;
import org.opensaml.xml.security.keyinfo.StaticKeyInfoCredentialResolver;
import org.opensaml.xml.security.x509.BasicX509Credential;
import org.opensaml.xml.signature.Signature;
import org.opensaml.xml.signature.SignatureValidator;
import org.opensaml.xml.validation.ValidationException;

/**
 * @author kevnls
 * If you use this code as a base for your implementation please leave this comment intact.
 * You should add your own name in addition.
 */

public class ProcessSAML extends HttpServlet {
  
    /**
     * Processes requests for both HTTP GET and POST methods.
     * @param request servlet request
     * @param response servlet response
     * @throws ServletException if a servlet-specific error occurs
     * @throws IOException if an I/O error occurs
     */

    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {

        response.setContentType("text/html;charset=UTF-8");
        PrintWriter out = response.getWriter();

        File signatureVerificationPublicKeyFile = new File("C:\\Documents and Settings\\kevnls\\My Documents\\NetBeansProjects\\SAMLReceiver\\files\\IdPSigningCert.cer");
        File decryptionPrivateKeyFile = new File("C:\\Documents and Settings\\kevnls\\My Documents\\NetBeansProjects\\SAMLReceiver\\files\\SPEncryptionCert.jks");
        String decryptionPrivateKeyName = "pvktmp:bd5ba0e0-9718-48ea-b6e6-32cd9c852d76";
        String decryptionPrivateKeyPassword = "!c3c0ld";

        try
        {
            //bootstrap the opensaml stuff
            org.opensaml.DefaultBootstrap.bootstrap();

            // get the message context
            MessageContext messageContext = new BasicSAMLMessageContext();
            messageContext.setInboundMessageTransport(new HttpServletRequestAdapter(request));
            HTTPPostDecoder samlMessageDecoder = new HTTPPostDecoder();
            samlMessageDecoder.decode(messageContext);

            // get the SAML Response
            Response samlResponse = (Response)messageContext.getInboundMessage();

            //get the certificate from the file
            InputStream inputStream2 = new FileInputStream(signatureVerificationPublicKeyFile);
            CertificateFactory certificateFactory = CertificateFactory.getInstance("X.509");
            X509Certificate certificate = (X509Certificate)certificateFactory.generateCertificate(inputStream2);
            inputStream2.close();

            //pull out the public key part of the certificate into a KeySpec
            X509EncodedKeySpec publicKeySpec = new X509EncodedKeySpec(certificate.getPublicKey().getEncoded());

            //get KeyFactory object that creates key objects, specifying RSA
            KeyFactory keyFactory = KeyFactory.getInstance("RSA");

            //generate public key to validate signatures
            PublicKey publicKey = keyFactory.generatePublic(publicKeySpec);

            //create credentials
            BasicX509Credential publicCredential = new BasicX509Credential();

            //add public key value
            publicCredential.setPublicKey(publicKey);

            //create SignatureValidator
            SignatureValidator signatureValidator = new SignatureValidator(publicCredential);

            //get the signature to validate from the response object
            Signature signature = samlResponse.getSignature();

            //try to validate
            try
            {
                signatureValidator.validate(signature);
            }
            catch (ValidationException ve)
            {
                out.println("Signature is not valid.");
                out.println(ve.getMessage());
                return;
            }

            //no validation exception was thrown
            out.println("Signature is valid.");

            //start decryption of assertion

            //load up a KeyStore
            KeyStore keyStore = KeyStore.getInstance("JKS");
            keyStore.load(new FileInputStream(decryptionPrivateKeyFile), decryptionPrivateKeyPassword.toCharArray());

            RSAPrivateKey privateKey = (RSAPrivateKey) keyStore.getKey(decryptionPrivateKeyName, decryptionPrivateKeyPassword.toCharArray());

            //create the credential
            BasicX509Credential decryptionCredential = new BasicX509Credential();
            decryptionCredential.setPrivateKey(privateKey);

            StaticKeyInfoCredentialResolver skicr = new StaticKeyInfoCredentialResolver(decryptionCredential);

            //create a decrypter
            Decrypter decrypter = new Decrypter(null, skicr, new InlineEncryptedKeyResolver());

            //decrypt the first (and only) assertion
            Assertion decryptedAssertion;

            try
            {
                decryptedAssertion = decrypter.decrypt(samlResponse.getEncryptedAssertions().get(0));
            }
            catch (DecryptionException de)
            {
                out.println("Assertion decryption failed.");
                out.println(de.getMessage());
                return;
            }

            out.println("Assertion decryption succeeded.");

            //loop through the nodes to get the Attributes
            //this is where you would do something with these elements
            //to tie this user with your environment
            List attributeStatements = decryptedAssertion.getAttributeStatements();
            for (int i = 0; i < attributeStatements.size(); i++)
            {
                List attributes = attributeStatements.get(i).getAttributes();
                for (int x = 0; x < attributes.size(); x++)
                {
                    String strAttributeName = attributes.get(x).getDOM().getAttribute("Name");

                    List attributeValues = attributes.get(x).getAttributeValues();
                    for (int y = 0; y < attributeValues.size(); y++)
                    {
                        String strAttributeValue = attributeValues.get(y).getDOM().getTextContent();
                        out.println(strAttributeName + ": " + strAttributeValue + " ");
                    }
                }
            }
        }
        catch (Exception ex)
        {
            ex.printStackTrace();
        }

    }

    //
    /**
     * Handles the HTTP GET method.
     * @param request servlet request
     * @param response servlet response
     * @throws ServletException if a servlet-specific error occurs
     * @throws IOException if an I/O error occurs
     */
    @Override
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
    }

    /**
     * Handles the HTTP POST method.
     * @param request servlet request
     * @param response servlet response
     * @throws ServletException if a servlet-specific error occurs
     * @throws IOException if an I/O error occurs
     */
    @Override
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
    }

    /**
     * Returns a short description of the servlet.
     * @return a String containing servlet description
     */
    @Override
    public String getServletInfo() {
        return "This servlet processes a SAML 2.0 Response.  It verifies the signature, " +
                "decrypts an assertion, and parses out the data in the attribute statements.  " +
                "If you use this code as a base for your implementation please leave the @author comment intact.  " +
                "You should add your own name in addition.";
    }//

}



Anyway, hope this is useful to someone.

Dark Arduino IDE Theme

I'm totally having fun playing around with my Arduino UNO, but the Arduino IDE is a little too bright for my tastes, so I created a dark theme and posted it here.

Here's a screenshot:

All you need to do is find your 'theme' folder (it may be nested a bit but it should be in the application folder somewhere under /lib/) and replace it with this folder.  I created this on a mac and it's theming version 1.0 of the IDE, but I'm guessing the theme folder is the same for all platforms.  Make a backup of yours before you drop this one in just in case though. 

You'll need to restart the Arduino IDE for the changes to take effect, but then you can sit back and let your eyes thank you!

Hope you like it.